Nov 19 2015

First glassing

Today I did my first glassing in a long time. It was actually quite satisfying.

This a a jig I made to curve a piece of 3/8” foam for a foot rest/storage area for the back seat passenger.


Under the wood is 3 layers of BID which has a 3/4” joggle in it so I can make a panel for the back seat electronics. You’ll see it later when I installed it behind the passengers headrest. I am moving the battery from the front to the back of the plane to save the weight (9 lbs) of battery cable. The tools normal stored in the headrest will be moved to the front of the plane.


No Comments

No comments yet.

RSS feed for comments on this post.

Leave a comment