Nov 29 2015


It was somewhat of a play day for me making templates and shop organization.

While, I trust myself to carve the nose by eye adequately by eye, but I have an old saying to: “trust but verify”. It really didn’t take to long to lay out the templates on some 1/4 luan plywood and cut them out on the band saw.

The new shape of the nose is revealed.


On the templates I drilled hose near each corner. After attaching the foam walls, if I sand down to the point that I hit a tattle tail hole in the corner, I will stop shaping the corner at that point. It will give me a 1/2” wall thickness.


Tomorrow I plan to pre-curve the sides, bottom and top prior to assemble. Another interesting day ahead.

No Comments

No comments yet.

RSS feed for comments on this post.

Leave a comment