Dec 22 2015

Air sperator completed.

The design of the water/air operator was completed. First constructed out of cardboard, then luan plywood, then foam/glass

wpid-IMG_3836-2015-12-22-20-56.jpg

The funny shaped dividers was my idea of using the available space and configuration that I had to work with to get the water out. All the dividers direct the water to the drain which will go into the strut cavity. The tubes out the sides will allow me to direct air to the dash without going through the heater.

wpid-IMG_3837-2015-12-22-20-56.jpg