Oct 11 2010

Wiring has started

Today,  I found myself getting a bit excited working on the plane because all the MAJOR issues have been solved and all the pieces of the puzzle are fitting nicely together.  Basically there are 3 major areas to complete.   Induction, hoses, wiring.  I still have a few minor items to do, but those will be easy as I already have all the installation issues with them (ELT install, Fire suppression system install) worked out.

The old inlets were cut off, and a fuel servo and oil cooling ducts (started today) will be constructed.  It will take 3 days to complete only because I have to let the fiberglass cure between the various the layup steps. 

This will be the new home for the fuel servo inlet.  Some hose needed to be rearranged to accommodate the duct.

Woo Hoo, wiring in earnest has finally started. I want to get the engine monitoring system installed first as I am still waiting to get the instrument panel back from the printers before I can work on the front of the plane.

No Comments

No comments yet.

RSS feed for comments on this post.

Leave a comment