Apr 27 2013

A new carard is born

The end wall was assembled without a hitch. Amazingly, I did not have to cut or make any changes to the project at all. Apparently the careful planing with the design program worked perfectly.

wpid-IMG_4585-2013-04-27-19-24.jpg

Some white paint on the plane really sets it out from the rest of the boards. I plan to install small LED lights into the structure to highlight the runway, the thresh hold lines and the VASI lights. Natrually, there will have to be some wingtip running lights and strobe lights.

wpid-IMG_4616-2013-04-27-19-24.jpg

Hum, what should I do with the big hole in the fusalage?

wpid-CIMG2420-2013-04-27-19-24.jpg

No Comments

No comments yet.

RSS feed for comments on this post.

Leave a comment