Jan 25 2016

Headrest panel supports

Today, I want do install the standoff supports for the back head rest panel.

wpid-IMG_3993-2016-01-25-20-43.jpg

In order to do so, I built a quick jig to simulate the panel with standoffs (to get the proper distance from the firewall) with a hole in it to reach through)

wpid-IMG_3985-2016-01-25-20-43.jpg

Hot glue the panel to the firewall, butter up the supports and install them on the back side. Easy.

wpid-IMG_3984-2016-01-25-20-43.jpg

Installed with nut plates.

wpid-IMG_4096-2016-01-25-20-43.jpg

No Comments

No comments yet.

RSS feed for comments on this post.

Leave a comment